PRODUCT FEATURES
- SUPER GLUE ACCELERATOR - SPEED UP THE BONDING TIME: No more waiting! Cures CA glue in seconds.
- NO MORE WHITENING: When superglues dry too fast, you'll end up with whitening or "hazing" of the bonding surface. Our specially formulated CA accelerator is made to dry slightly slower than other accelerators on the market to prevent this effect.
- EXTRA SUPPLIES: 16-ounce refill bottle includes: (1) 2-ounce pump sprayer bottle, (1) Extra pump sprayer
PRODUCT DESCRIPTION
Starbond Super Glue Accelerator, also known as CA glue "activator," is used to significantly speed up the drying time of cyanoacrylate super glues. The CA glue accelerator is a solvent-based product that can be applied before and/or after CA glue application. Starbond Super Glue Accelerator is commonly paired with thicker viscosity CA glues and black CA glue, as these adhesives take longer to dry. In addition, Starbond Super Glue Accelerator is useful when priming uneven surfaces or material combinations that are harder to bond, and in colder, drier environments where curing time may be delayed. Starbond Super Glue Accelerator comes in a pump sprayer and aerosol form.
WARNING This product can expose you to chemicals including N, N-Dimethyl-p-Toluidine, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
- Used to cure the CA that flows from joints that are being pressed together, greatly enhancing the joints strength
- When using higher volumes of CA during gap-filling applications, bonding time may take much longer, so Accelerator is highly recommended