Refurbished Bass Rockers 4000W Class D Monoblock Car Amplifier (BR2000.1D)

BR2000.1D Car Amplifier Features:

• Total Peak Power (MAX): 4000 Watts
• Total Continous Power (RMS): 2000 Watts
• Number of channels: 1 (Mono)
• Heavy Duty Aluminum Heat Sink
• Thermal / Short Circuit / D.C protection
• High-current MOSFET devices
• High capacity power transformer
• Double PCB circuit board design
• LFP Crossover 40Hz to 180Hz
• 24dB/octave BOOST
• Volume remote control
• Die-cast silver terminals
• Power and Protection LED indicators,
• 1 Year Warranty
• Dimension (L x W x H): 19-1/16" (48.41cm) x 9-7/32" (23.44cm) x 2-1/8" (5.41cm)

BR2000.1D Amplifier Specifications:

• Amplifier Class: D
• Number of Channels: 1 Channel (Mono)
• Peak Power: 4000 Watts
• Power at 4 Ohms: 700 Watts RMS @ 14.4V
• Power at 2 Ohms: 1400 Watts RMS @ 14.4V
• Power at 1 Ohm: 2000 Watts RMS @ 14.4V
• Signal-to-Noise Ratio: >95dB
• Build-in Crossover: Low-pass (LP)
• Low Pass Filter: 40Hz - 180Hz
• Variable Subsonic Filter: 0Hz - 80Hz
• Bass Boost: 0dB to 12dB @ 30Hz-80Hz
• Length: 19.06" (484.12mm)
• Width: 9.23" (234.44mm)
• Height: 2.13" (54.10mm)
• Gauge Speakers: 12 Ga, 14 Ga, 16 Ga
• Power Gauge: Up-to 4 Ga
• Highlights: Wired Remote
• Accessories: Mounting Screws, Wired Remote, Spare Fuses

BR2000.1D Power Supply Specs:

• 35 Nanosecond Switching Diode
• MMT Regulated Power Supplies
• High Capacity Power Transformer
• Multiple By pass Capacitance incoming 12 V Supply
• Time Delay Turn on with Opto-coupled muting circuits
• Power Supplies use pulse-width modulation
• Thermal and reverse polarity protection
• Output stages utilize high current mosefet devices
• High Speed audio grade component's all level stages
• Active constant current bias tracking circuit
• Gold plated RCA inputs and connectors
• Wide range of sensitivity accept signals from any unit
• True Line output
• Short Circuit protection
• Auto Bridge Feature